Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Bioinspired Supramolecular Slippery Organogels for Controlling Pathogen Spread by Respiratory Droplets

Surface-deposited pathogens are sources for the spread of infectious diseases. Protecting public facilities with a replaceable or recyclable antifouling coating is a promising approach to control pathogen transmission. However, most antifouling coatings are less effective in preventing pathogen-contained respiratory droplets because these tiny droplets are difficult to repel, and the deposited pathogens can remain viable from hours to days. Inspired by mucus, an antimicrobial supramolecular organogel for the control of microdroplet-mediated pathogen spread is developed. The developed organogel coating harvests a couple of unique features including localized molecular control-release, readily damage healing, and persistent fouling-release properties, which are preferential for antifouling coating. Microdroplets deposited on the organogel surfaces will be spontaneously wrapped with a thin liquid layer, and will therefore be disinfected rapidly due to a mechanism of spatially enhanced release of bactericidal molecules. Furthermore, the persistent fouling-release and damage-healing properties will significantly extend the life-span of the coating, making it promising for diverse applications.     

雪菊精油对希氏肠球菌产酪胺及相关基因表达的影响

探讨不同质量浓度雪菊精油对希氏肠球菌（Enterococcus hirae）N47产酪胺的影响机制。利用反转录实时定量聚合酶链式反应分析E. hirae在雪菊精油作用下酪氨酸脱羧途径相关基因的表达情况；利用高效液相色谱法检测不同质量浓度雪菊精油对E. hirae产酪胺的影响。并将E. hirae接入到含不同质量浓度雪菊精油的熏马肠中发酵，评估香肠pH值、菌落总数和酪胺积累量。结果表明：在E. hirae纯培养体系和熏马肠体系中，雪菊精油通过抑制微生物的生长和酪氨酸脱羧途径中tyr DC、tyr P基因的表达，降低酪胺的积累量（P＜0.05）。当雪菊精油添加量为1/2最小抑菌浓度（minimal inhibitory concentration，MIC）和MIC时，熏马肠中酪胺的含量分别为78.52 mg/kg和45.83 mg/kg，较对照组分别减少了64.72%和79.41%。     

特低渗砂岩油藏CO2-低界面张力黏弹流体协同驱油机理研究

目的特低渗油藏储层物性差、层间非均质性强,造成CO₂驱易发生气窜,提高采收率效果欠佳,其中,CO₂水气交替驱作为结合CO₂驱和水驱优势的方法,具有较高的适用性。为进一步改善CO₂-水交替驱的开发效果,开展了CO₂-低界面张力黏弹流体协同驱油研究。 方法通过界面张力和润湿性能测试评价低界面张力黏弹流体基本性能,并利用微观可视化驱油实验及岩心驱油实验等,探究了不同驱替方式的驱油效果和CO₂-低界面张力黏弹流体协同驱油过程中二者之间的“协同作用”机理。 结果低界面张力黏弹流体具备良好的界面活性和改变岩石表面润湿性能力,水驱后开展CO₂驱、低界面张力黏弹流体驱、CO₂-低界面张力黏弹流体交替协同驱,采收率可在水驱基础上分别提高0.91%、10.66%、16.25%,其提高采收率机理包括降低界面张力、改善流度比、改变岩石表面润湿性及乳化作用的协同效应等。 结论CO₂-低界面张力黏弹流体协同驱既可有效增强非均质特低渗砂岩油藏注CO₂过程中气体流动性控制,又能够降低CO₂萃取轻烃导致重质组分沉积的影响,具有协同增效作用。      

Ferulic acid and EGCG alter the structural characteristics of ovalbumin and its application in mineral loading

This study aims to fabricate mineral-loading nanocarriers using natural materials. The interaction patterns between ovalbumin (OVA) and four water-soluble polyphenols, namely ferulic acid (FA), (-)-Epigallo-catechin 3-gallate (EGCG), gallic acid (GA) and epicatechin (EC), were investigated. Results showed that the optimised conditions for preparing stable OVA–polyphenol complexes are at the OVA–polyphenol ratio of 4:1 at pH 6, under which OVA–FA and OVA–EGCG showed the highest stability and mineral-loading capacity among four OVA–polyphenol complexes. The fluorescence results indicated that the addition of EGCG and FA induced a significant fluorescence quenching to OVA. The interaction between OVA and polyphenols involved hydrogen bonding, hydrophobic interaction and electrostatic interaction. Fourier transform infrared spectroscopy (FTIR) analysis suggested that both FA and EGCG enhanced the stability and orderliness of the structure of OVA. The transmission electron microscopy images also exhibited the spherical structure of OVA after the addition of FA and EGCG. Furthermore, scanning electron microscope–energy dispersive X-ray spectrum results suggested that OVA–FA and OVA–EGCG complexes were better mineral carriers than OVA–GA and OVA–EC. This study may serve as the theoretical support for the promising application of OVA in the fabrication of mineral-loading nanocarriers in functional food and pharmaceutic.     

茶多酚对谷氨酸脱氢酶和纳豆氨含量的影响

纳豆中含有纳豆激酶等功能性成分，能够有效预防心血管疾病，然而，发酵过程中产生的氨味大大降低了其在我国的可接受度。为降低纳豆氨含量，本研究比较4种物质对纳豆芽孢杆菌产氨的关键酶——谷氨酸脱氢酶的抑制效果，结果显示茶多酚作用效果最佳。研究表明茶多酚是一种底物竞争型抑制剂，IC50为20.60 μg/mL，且它能够进入纳豆芽孢杆菌细胞，有望作为添加剂来抑制后者胞内的谷氨酸脱氢酶活性，减少纳豆发酵过程中氨的产生。通过分析纳豆芽孢杆菌的生长规律、纳豆发酵过程中氨含量的变化趋势及茶多酚抑制产氨的效果，确定最佳工艺条件为:在发酵第11小时添加4.16 mg/g茶多酚。该条件下，纳豆中氨含量下降了63.90%，而纳豆激酶活性没有显著性变化。经感官评定证实，添加茶多酚能够有效降低纳豆的氨味，提高产品的可接受度，具有极大的应用价值。     

基于VMD和BSA-KELM的高陡边坡位移预测模型研究

边坡位移的时间序列曲线存在复杂的非线性特性,传统的预测模型精度不足以满足预测要求。为此提出了基于变分模态分解的鸟群优化-核极限学习机的预测模型,并用于河北省某水泥厂的边坡位移预测。该方法首先采用VMD把边坡位移序列分解为一系列的有限带宽的子序列,再对各子序列分别采用相空间重构并用核极限学习机预测,采用鸟群算法优化相空间重构的嵌入维度和KELM中惩罚系数和核参数三个数值,以取得最优预测模型。最后将各个子序列预测值叠加,得到边坡位移的最终预测值。结果表明：和KELM、BSA-KELM、EEMD-BSA-KELM模型相比,基于VMD的BSA-KELM预测精度更高,为边坡位移的预测提供一种有效的方法。     

《分析化学及实验》课程教学中融入思政元素的探索与实践

《分析化学及实验》课程是面向轻化类专业开设的专业基础课程。通过“理虚实一体化”的教学模式，让学生从专业应用的角度理解分析化学知识和分析方法原理，正确掌握分析化学的操作技能和常规分析仪器使用，熟悉分析测定工作的一般程序。教学中针对不同的教学内容融入相应的思政元素，培养学生“精益求精”的工作态度，培植“诚信为本，团结协助，追求完美”的工匠意识，为后续课程的学习及职业发展打下良好的基础。